[sg_popup id=”1503″ event=”onLoad”][/sg_popup] This article is around Raspberry Pi and this Re speaker 2 Mics Pi HAT. ReSpeaker 2-Mics Pi HAT is a dual-microphone expansion board for Raspberry Pi designed for voice applications, like Amazon Alexa or Google Assistant. So if you are interested in playing around Alexa or assistant enabled applications with Raspberry Pi you can certainly try this out. We will set it up with Raspberry Pi and will check some demo applications. The board is developed around WM8960, a low power stereo codec. There are 2 microphones…
Read MoreTag: pi
OSMC on Raspberry PI with Setup and Control using Android App
A video about the installation of OSMC onto Raspberry Pi to make a complete media center for home entertainment. The video shows how to install OS as well as configuring it such that it can be accessed by Android App so that it can be controlled wirelessly. Check out the video for more details. Bikash Narayan PandaDeveloper, Tinkere, a proud Dad.. love to spend my available time playing with Tech!! wglabz.in
Read MoreDHT12 Interfacing with Raspberry Pi using Pi4J
This video around raspberry pi showing how to interface DHT12 humidity and temperature sensor with raspberry pi by using JAVA nad Pi4j. DHT12 its a temperature sensor with a 1-Wire and I2C interface to connect with external controllers and having 1-Wire interface makes it compatible with the older DHT11 sensor but with a higher accuracy. For this tutorial, we are going to use the I2C interface of the sensor and to interact with it, we will be using JAVA. One issue with the DHT12 I2C interface is that the device…
Read MoreDIN Mount Enclosure for Raspberry Pi
RPI-BC DIN rail housing is designed to accommodate Raspberry Pi computers. Besides the Raspberry Pi boards, the housing can also be equipped with further printed-circuit boards to integrate additional components and circuits. Features: Tool-free mounting Plenty of space for additional circuits on matrix or additional boards Width: 107.6 mm Compatible with Raspberry Pi A+, B+, B2, B3 (Model B Not compatible) Can be mounted on the wall or DIN rail.Website : Source: http://bit.ly/2lIrOsK (Phoenix Contact) Links: Element14 Roadtest : http://bit.ly/2jVZhBx Buy from Element14: http://bit.ly/2l8aTlO Bikash Narayan PandaDeveloper, Tinkere, a proud…
Read MoreAll about NanoPi S2 | Raspberry Pi Alternative
The NanoPi S2(S2) is designed and developed by FriendlyElec for professionals, enterprise users, makers, and hobbyists. It is a small board with WiFi, Bluetooth, and eMMC. It uses the Samsung Quad Core Cortex-A9 S5P4418 SoC with dynamic frequency scaling up to 1.4GHz. It has 1G DDR3 RAM, 802.11 b/g/n WiFi & Bluetooth 4.0 module. Its inbuilt power management unit uses the AXP228 chip which supports software shutdown. Website: http://bit.ly/2k8Ek2K
Read MoreMeasure Distance using Ultrasonic Sensor HC – SR04 | Pi4J | JAVA | Raspberry Pi
This is a simple tutorial showing how to interface HC – SR04 ultrasonic ranging module with Raspberry Pi to measure distance using JAVA. Ultrasonic ranging module HC – SR04 provides 2cm – 400cm non-contact measurement function, the ranging accuracy can reach to 3mm. The modules include ultrasonic transmitters, receiver and control circuit. The basic principle of work: (1) Using IO trigger for at least 10us high-level signal, (2) The Module automatically sends eight 40 kHz and detect whether there is a pulse signal back. (3) IF the signal back, through…
Read MoreFedora 25 on Raspberry Pi | Let’s check it out
Finally Fedora 25 beta version is out with the support for Raspberry Pi 2/3. Why not to give it a try ? In this video let’s check it out how it works. Fedora /fᵻˈdɒr.ə/ (formerly Fedora Core) is an operating system based on the Linux kernel, developed by the community-supported Fedora Project and sponsored by Red Hat. Fedora contains software distributed under a free and open-source license and aims to be on the leading edge of such technologies. As of February 2016, Fedora has an estimated 1.2 million users, including…
Read More